BLE 允许您传输最多 20 个字节。
如果要发送超过 20 个字节，则应定义数组以包含所需的数据包数。byte[]
如果要发送少于 160 个字符（160 字节），以下示例工作正常。
p/s ：根据需要编辑以下内容。不要完全跟着我。
实际上，当我们使用BLE时，移动端和固件端需要设置Key（例如。 ...)以定义两侧之间的连接门。0x03
这个想法是：
数据构造（20 字节）：
1 - - 定义 ： ex。消息门 ID 。Byte 1Gate IDbyte[0] = 0x03
2 - - 定义：是最后一个数据包或继续发送数据包。Byte 2recognization0x000x01
3 - （消除后应为 18 个字节 & ） - 在此处附加消息内容。Byte 3Byte 1Byte 2
在阅读下面的代码之前，请先了解我的逻辑。
下面是发送包含许多数据包的消息的示例，每个数据包都是一个大小为 20 字节的数组。
private void sendMessage(BluetoothGattCharacteristic characteristic, String CHARACTERS){
byte[] initial_packet = new byte[3];
/**
* Indicate byte
*/
initial_packet[0] = BLE.INITIAL_MESSAGE_PACKET;
if (Long.valueOf(
String.valueOf(CHARACTERS.length() + initial_packet.length))
> BLE.DEFAULT_BYTES_VIA_BLE) {
sendingContinuePacket(characteristic, initial_packet, CHARACTERS);
} else {
sendingLastPacket(characteristic, initial_packet, CHARACTERS);
}
}
private void sendingContinuePacket(BluetoothGattCharacteristic characteristic,
byte[] initial_packet, String CHARACTERS){
/**
* TODO If data length > Default data can sent via BLE : 20 bytes
*/
// Check the data length is large how many times with Default Data (BLE)
int times = Byte.valueOf(String.valueOf(
CHARACTERS.length() / BLE.DEFAULT_BYTES_IN_CONTINUE_PACKET));
Log.i(TAG, "CHARACTERS.length() " + CHARACTERS.length());
Log.i(TAG, "times " + times);
// TODO
// 100 : Success
// 101 : Error
byte[] sending_continue_hex = new byte[BLE.DEFAULT_BYTES_IN_CONTINUE_PACKET];
for (int time = 0; time <= times; time++) {
/**
* Wait second before sending continue packet
*/
try {
Thread.sleep(200);
} catch (InterruptedException e) {
e.printStackTrace();
}
if (time == times) {
Log.i(TAG, "LAST PACKET ");
/**
* If you do not have enough characters to send continue packet,
* This is the last packet that will be sent to the band
*/
/**
* Packet length byte :
*/
/**
* Length of last packet
*/
int character_length = CHARACTERS.length()
- BLE.DEFAULT_BYTES_IN_CONTINUE_PACKET*times;
initial_packet[1] = Byte.valueOf(String.valueOf(character_length
+ BLE.INITIAL_MESSAGE_PACKET_LENGTH));
initial_packet[2] = BLE.SENDING_LAST_PACKET;
Log.i(TAG, "character_length " + character_length);
/**
* Message
*/
// Hex file
byte[] sending_last_hex = new byte[character_length];
// Hex file : Get next bytes
for (int i = 0; i < sending_last_hex.length; i++) {
sending_last_hex[i] =
CHARACTERS.getBytes()[sending_continue_hex.length*time + i];
}
// Merge byte[]
byte[] last_packet =
new byte[character_length + BLE.INITIAL_MESSAGE_PACKET_LENGTH];
System.arraycopy(initial_packet, 0, last_packet,
0, initial_packet.length);
System.arraycopy(sending_last_hex, 0, last_packet,
initial_packet.length, sending_last_hex.length);
// Set value for characteristic
characteristic.setValue(last_packet);
} else {
Log.i(TAG, "CONTINUE PACKET ");
/**
* If you have enough characters to send continue packet,
* This is the continue packet that will be sent to the band
*/
/**
* Packet length byte
*/
int character_length = sending_continue_hex.length;
/**
* TODO Default Length : 20 Bytes
*/
initial_packet[1] = Byte.valueOf(String.valueOf(
character_length + BLE.INITIAL_MESSAGE_PACKET_LENGTH));
/**
* If sent data length > 20 bytes (Default : BLE allow send 20 bytes one time)
* -> set 01 : continue sending next packet
* else or if after sent until data length < 20 bytes
* -> set 00 : last packet
*/
initial_packet[2] = BLE.SENDING_CONTINUE_PACKET;
/**
* Message
*/
// Hex file : Get first 17 bytes
for (int i = 0; i < sending_continue_hex.length; i++) {
Log.i(TAG, "Send stt : "
+ (sending_continue_hex.length*time + i));
// Get next bytes
sending_continue_hex[i] =
CHARACTERS.getBytes()[sending_continue_hex.length*time + i];
}
// Merge byte[]
byte[] sending_continue_packet =
new byte[character_length + BLE.INITIAL_MESSAGE_PACKET_LENGTH];
System.arraycopy(initial_packet, 0, sending_continue_packet,
0, initial_packet.length);
System.arraycopy(sending_continue_hex, 0, sending_continue_packet,
initial_packet.length, sending_continue_hex.length);
// Set value for characteristic
characteristic.setValue(sending_continue_packet);
}
// Write characteristic via BLE
mBluetoothGatt.writeCharacteristic(characteristic);
}
}
public boolean writeCharacteristic(BluetoothGattCharacteristic characteristic,
String data) {
if (mBluetoothAdapter == null || mBluetoothGatt == null) {
Log.w(TAG, "BluetoothAdapter not initialized");
return false;
}
if (ActivityBLEController.IS_FIRST_TIME) {
/**
* In the first time,
* should send the Title
*/
byte[] merge_title = sendTitle(data);
// Set value for characteristic
characteristic.setValue(merge_title);
// Write characteristic via BLE
mBluetoothGatt.writeCharacteristic(characteristic);
// Reset
ActivityBLEController.IS_FIRST_TIME = false;
return true;
} else {
/**
* In the second time,
* should send the Message
*/
if (data.length() <= BLE.LIMIT_CHARACTERS) {
sendMessage(characteristic, data);
// Reset
ActivityBLEController.IS_FIRST_TIME = true;
return true;
} else {
// Typed character
typed_character = data.length();
return false;
}
}
}
