如何附加到 AES 加密文件
我正在编写某种生成加密日志文件的记录器。不幸的是,密码学并不是我的强项。现在我可以写入文件几条消息,然后关闭文件。然后我可以打开它,附加一些消息,再次关闭,解密后,我在文件中间看到填充字节。有没有办法处理加密文件,而不必在每次想要附加一些消息时解密它?
编辑:更多细节。当前实现 utlizes CipherOutputStream.据我所知,没有办法寻求使用它。如果我控制输出数据大小可被块大小整除,我可以使用“NoPadding”选项吗?
我正在编写某种生成加密日志文件的记录器。不幸的是,密码学并不是我的强项。现在我可以写入文件几条消息,然后关闭文件。然后我可以打开它,附加一些消息,再次关闭,解密后,我在文件中间看到填充字节。有没有办法处理加密文件,而不必在每次想要附加一些消息时解密它?
编辑:更多细节。当前实现 utlizes CipherOutputStream.据我所知,没有办法寻求使用它。如果我控制输出数据大小可被块大小整除,我可以使用“NoPadding”选项吗?
如果您在CBC模式下使用AES,则可以使用倒数第二个块作为IV来解密最后一个块,该块可能仅部分完整,然后再次加密最后一个块的明文,然后是新的明文。
以下是概念证明:
import java.io.File;
import java.io.FileInputStream;
import java.io.FileOutputStream;
import java.io.IOException;
import java.io.OutputStream;
import java.io.RandomAccessFile;
import java.security.InvalidAlgorithmParameterException;
import java.security.InvalidKeyException;
import java.security.NoSuchAlgorithmException;
import java.security.SecureRandom;
import javax.crypto.BadPaddingException;
import javax.crypto.Cipher;
import javax.crypto.IllegalBlockSizeException;
import javax.crypto.NoSuchPaddingException;
import javax.crypto.spec.IvParameterSpec;
import javax.crypto.spec.SecretKeySpec;
public class AppendAES {
public static void appendAES(File file, byte[] data, byte[] key) throws IOException, NoSuchAlgorithmException, NoSuchPaddingException, InvalidKeyException, InvalidAlgorithmParameterException, IllegalBlockSizeException, BadPaddingException {
RandomAccessFile rfile = new RandomAccessFile(file,"rw");
byte[] iv = new byte[16];
byte[] lastBlock = null;
if (rfile.length() % 16L != 0L) {
throw new IllegalArgumentException("Invalid file length (not a multiple of block size)");
} else if (rfile.length() == 16) {
throw new IllegalArgumentException("Invalid file length (need 2 blocks for iv and data)");
} else if (rfile.length() == 0L) {
// new file: start by appending an IV
new SecureRandom().nextBytes(iv);
rfile.write(iv);
// we have our iv, and there's no prior data to reencrypt
} else {
// file length is at least 2 blocks
rfile.seek(rfile.length()-32); // second to last block
rfile.read(iv); // get iv
byte[] lastBlockEnc = new byte[16];
// last block
// it's padded, so we'll decrypt it and
// save it for the beginning of our data
rfile.read(lastBlockEnc);
Cipher cipher = Cipher.getInstance("AES/CBC/PKCS5Padding");
cipher.init(Cipher.DECRYPT_MODE, new SecretKeySpec(key,"AES"), new IvParameterSpec(iv));
lastBlock = cipher.doFinal(lastBlockEnc);
rfile.seek(rfile.length()-16);
// position ourselves to overwrite the last block
}
Cipher cipher = Cipher.getInstance("AES/CBC/PKCS5Padding");
cipher.init(Cipher.ENCRYPT_MODE, new SecretKeySpec(key,"AES"), new IvParameterSpec(iv));
byte[] out;
if (lastBlock != null) { // lastBlock is null if we're starting a new file
out = cipher.update(lastBlock);
if (out != null) rfile.write(out);
}
out = cipher.doFinal(data);
rfile.write(out);
rfile.close();
}
public static void decryptAES(File file, OutputStream out, byte[] key) throws IOException, NoSuchAlgorithmException, NoSuchPaddingException, InvalidKeyException, InvalidAlgorithmParameterException, IllegalBlockSizeException, BadPaddingException {
// nothing special here, decrypt as usual
FileInputStream fin = new FileInputStream(file);
byte[] iv = new byte[16];
if (fin.read(iv) < 16) {
throw new IllegalArgumentException("Invalid file length (needs a full block for iv)");
};
Cipher cipher = Cipher.getInstance("AES/CBC/PKCS5Padding");
cipher.init(Cipher.DECRYPT_MODE, new SecretKeySpec(key,"AES"), new IvParameterSpec(iv));
byte[] buff = new byte[1<<13]; //8kiB
while (true) {
int count = fin.read(buff);
if (count == buff.length) {
out.write(cipher.update(buff));
} else {
out.write(cipher.doFinal(buff,0,count));
break;
}
}
fin.close();
}
public static void main(String[] args) throws Exception {
byte[] key = new byte[]{0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15};
for (int i = 0; i<1000; i++) {
appendAES(new File("log.aes"),"All work and no play makes Jack a dull boy. ".getBytes("UTF-8"),key);
}
decryptAES(new File("log.aes"), new FileOutputStream("plain.txt"), key);
}
}
我想指出的是,输出与在一次运行中加密所有内容所产生的输出没有什么不同。这不是一种自定义形式的加密---它是标准的AES / CBC / PKCS5Padding。唯一特定于实现的细节是,对于空白文件,我在开始数据之前已经编写了iv。
编辑:改进(根据我的口味)解决方案使用:CipherOutputStream
import java.io.BufferedReader;
import java.io.File;
import java.io.FileInputStream;
import java.io.FileOutputStream;
import java.io.IOException;
import java.io.InputStreamReader;
import java.io.RandomAccessFile;
import java.security.InvalidAlgorithmParameterException;
import java.security.InvalidKeyException;
import java.security.NoSuchAlgorithmException;
import java.security.SecureRandom;
import javax.crypto.BadPaddingException;
import javax.crypto.Cipher;
import javax.crypto.CipherInputStream;
import javax.crypto.CipherOutputStream;
import javax.crypto.IllegalBlockSizeException;
import javax.crypto.NoSuchPaddingException;
import javax.crypto.spec.IvParameterSpec;
import javax.crypto.spec.SecretKeySpec;
public class AppendAES {
public static CipherOutputStream appendAES(File file, SecretKeySpec key) throws IOException, NoSuchAlgorithmException, NoSuchPaddingException, InvalidKeyException, InvalidAlgorithmParameterException, IllegalBlockSizeException, BadPaddingException {
return appendAES(file, key, null);
}
public static CipherOutputStream appendAES(File file, SecretKeySpec key, SecureRandom sr) throws IOException, NoSuchAlgorithmException, NoSuchPaddingException, InvalidKeyException, InvalidAlgorithmParameterException, IllegalBlockSizeException, BadPaddingException {
RandomAccessFile rfile = new RandomAccessFile(file,"rw");
byte[] iv = new byte[16];
byte[] lastBlock = null;
if (rfile.length() % 16L != 0L) {
throw new IllegalArgumentException("Invalid file length (not a multiple of block size)");
} else if (rfile.length() == 16) {
throw new IllegalArgumentException("Invalid file length (need 2 blocks for iv and data)");
} else if (rfile.length() == 0L) {
// new file: start by appending an IV
if (sr == null) sr = new SecureRandom();
sr.nextBytes(iv);
rfile.write(iv);
} else {
// file length is at least 2 blocks
rfile.seek(rfile.length()-32);
rfile.read(iv);
byte[] lastBlockEnc = new byte[16];
rfile.read(lastBlockEnc);
Cipher cipher = Cipher.getInstance("AES/CBC/PKCS5Padding");
cipher.init(Cipher.DECRYPT_MODE, key, new IvParameterSpec(iv));
lastBlock = cipher.doFinal(lastBlockEnc);
rfile.seek(rfile.length()-16);
}
Cipher cipher = Cipher.getInstance("AES/CBC/PKCS5Padding");
cipher.init(Cipher.ENCRYPT_MODE, key, new IvParameterSpec(iv));
byte[] out;
if (lastBlock != null) {
out = cipher.update(lastBlock);
if (out != null) rfile.write(out);
}
CipherOutputStream cos = new CipherOutputStream(new FileOutputStream(rfile.getFD()),cipher);
return cos;
}
public static CipherInputStream decryptAES(File file, SecretKeySpec key) throws IOException, NoSuchAlgorithmException, NoSuchPaddingException, InvalidKeyException, InvalidAlgorithmParameterException, IllegalBlockSizeException, BadPaddingException {
FileInputStream fin = new FileInputStream(file);
byte[] iv = new byte[16];
if (fin.read(iv) < 16) {
throw new IllegalArgumentException("Invalid file length (needs a full block for iv)");
};
Cipher cipher = Cipher.getInstance("AES/CBC/PKCS5Padding");
cipher.init(Cipher.DECRYPT_MODE, key, new IvParameterSpec(iv));
CipherInputStream cis = new CipherInputStream(fin,cipher);
return cis;
}
public static void main(String[] args) throws Exception {
byte[] keyBytes = new byte[]{
0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
};
SecretKeySpec key = new SecretKeySpec(keyBytes,"AES");
for (int i = 0; i<100; i++) {
CipherOutputStream cos = appendAES(new File("log.aes"),key);
cos.write("All work and no play ".getBytes("UTF-8"));
cos.write("makes Jack a dull boy. \n".getBytes("UTF-8"));
cos.close();
}
CipherInputStream cis = decryptAES(new File("log.aes"), key);
BufferedReader bread = new BufferedReader(new InputStreamReader(cis,"UTF-8"));
System.out.println(bread.readLine());
cis.close();
}
}
我喜欢maybeWeCouldStealAVan提供的解决方案。但这并没有正确实现'flush()',我发现每次附加消息时都必须关闭并重新打开文件,以确保不会丢失任何内容。所以我重写了它。我的解决方案将在每次刷新时写出最后一个块,但在添加下一条消息时重写此块。使用这种向前2步,后退1步的方法,不可能使用TransputStream的方法,相反,我直接在RandomAccessFile之上实现了它。
import javax.crypto.*;
import javax.crypto.spec.IvParameterSpec;
import javax.crypto.spec.SecretKeySpec;
import java.io.*;
import java.security.*;
public class FlushableCipherOutputStream extends OutputStream
{
private static int HEADER_LENGTH = 16;
private SecretKeySpec key;
private RandomAccessFile seekableFile;
private boolean flushGoesStraightToDisk;
private Cipher cipher;
private boolean needToRestoreCipherState;
/** the buffer holding one byte of incoming data */
private byte[] ibuffer = new byte[1];
/** the buffer holding data ready to be written out */
private byte[] obuffer;
/** Each time you call 'flush()', the data will be written to the operating system level, immediately available
* for other processes to read. However this is not the same as writing to disk, which might save you some
* data if there's a sudden loss of power to the computer. To protect against that, set 'flushGoesStraightToDisk=true'.
* Most people set that to 'false'. */
public FlushableCipherOutputStream(String fnm, SecretKeySpec _key, boolean append, boolean _flushGoesStraightToDisk)
throws IOException
{
this(new File(fnm), _key, append,_flushGoesStraightToDisk);
}
public FlushableCipherOutputStream(File file, SecretKeySpec _key, boolean append, boolean _flushGoesStraightToDisk)
throws IOException
{
super();
if (! append)
file.delete();
seekableFile = new RandomAccessFile(file,"rw");
flushGoesStraightToDisk = _flushGoesStraightToDisk;
key = _key;
try {
cipher = Cipher.getInstance("AES/CBC/PKCS5Padding");
byte[] iv = new byte[16];
byte[] headerBytes = new byte[HEADER_LENGTH];
long fileLen = seekableFile.length();
if (fileLen % 16L != 0L) {
throw new IllegalArgumentException("Invalid file length (not a multiple of block size)");
} else if (fileLen == 0L) {
// new file
// You can write a 16 byte file header here, including some file format number to represent the
// encryption format, in case you need to change the key or algorithm. E.g. "100" = v1.0.0
headerBytes[0] = 100;
seekableFile.write(headerBytes);
// Now appending the first IV
SecureRandom sr = new SecureRandom();
sr.nextBytes(iv);
seekableFile.write(iv);
cipher.init(Cipher.ENCRYPT_MODE, key, new IvParameterSpec(iv));
} else if (fileLen <= 16 + HEADER_LENGTH) {
throw new IllegalArgumentException("Invalid file length (need 2 blocks for iv and data)");
} else {
// file length is at least 2 blocks
needToRestoreCipherState = true;
}
} catch (InvalidKeyException e) {
throw new IOException(e.getMessage());
} catch (NoSuchAlgorithmException e) {
throw new IOException(e.getMessage());
} catch (NoSuchPaddingException e) {
throw new IOException(e.getMessage());
} catch (InvalidAlgorithmParameterException e) {
throw new IOException(e.getMessage());
}
}
/**
* Writes one _byte_ to this output stream.
*/
public void write(int b) throws IOException {
if (needToRestoreCipherState)
restoreStateOfCipher();
ibuffer[0] = (byte) b;
obuffer = cipher.update(ibuffer, 0, 1);
if (obuffer != null) {
seekableFile.write(obuffer);
obuffer = null;
}
}
/** Writes a byte array to this output stream. */
public void write(byte data[]) throws IOException {
write(data, 0, data.length);
}
/**
* Writes <code>len</code> bytes from the specified byte array
* starting at offset <code>off</code> to this output stream.
*
* @param data the data.
* @param off the start offset in the data.
* @param len the number of bytes to write.
*/
public void write(byte data[], int off, int len) throws IOException
{
if (needToRestoreCipherState)
restoreStateOfCipher();
obuffer = cipher.update(data, off, len);
if (obuffer != null) {
seekableFile.write(obuffer);
obuffer = null;
}
}
/** The tricky stuff happens here. We finalise the cipher, write it out, but then rewind the
* stream so that we can add more bytes without padding. */
public void flush() throws IOException
{
try {
if (needToRestoreCipherState)
return; // It must have already been flushed.
byte[] obuffer = cipher.doFinal();
if (obuffer != null) {
seekableFile.write(obuffer);
if (flushGoesStraightToDisk)
seekableFile.getFD().sync();
needToRestoreCipherState = true;
}
} catch (IllegalBlockSizeException e) {
throw new IOException("Illegal block");
} catch (BadPaddingException e) {
throw new IOException("Bad padding");
}
}
private void restoreStateOfCipher() throws IOException
{
try {
// I wish there was a more direct way to snapshot a Cipher object, but it seems there's not.
needToRestoreCipherState = false;
byte[] iv = cipher.getIV(); // To help avoid garbage, re-use the old one if present.
if (iv == null)
iv = new byte[16];
seekableFile.seek(seekableFile.length() - 32);
seekableFile.read(iv);
byte[] lastBlockEnc = new byte[16];
seekableFile.read(lastBlockEnc);
cipher.init(Cipher.DECRYPT_MODE, key, new IvParameterSpec(iv));
byte[] lastBlock = cipher.doFinal(lastBlockEnc);
seekableFile.seek(seekableFile.length() - 16);
cipher.init(Cipher.ENCRYPT_MODE, key, new IvParameterSpec(iv));
byte[] out = cipher.update(lastBlock);
assert out == null || out.length == 0;
} catch (Exception e) {
throw new IOException("Unable to restore cipher state");
}
}
public void close() throws IOException
{
flush();
seekableFile.close();
}
}
您可以了解如何使用它并使用以下方法对其进行测试:
import org.junit.Test;
import javax.crypto.Cipher;
import javax.crypto.CipherInputStream;
import javax.crypto.spec.IvParameterSpec;
import javax.crypto.spec.SecretKeySpec;
import java.io.*;
import java.io.BufferedWriter;
public class TestFlushableCipher {
private static byte[] keyBytes = new byte[]{
// Change these numbers lest other StackOverflow readers can read your log files
-53, 93, 59, 108, -34, 17, -72, -33, 126, 93, -62, -50, 106, -44, 17, 55
};
private static SecretKeySpec key = new SecretKeySpec(keyBytes,"AES");
private static int HEADER_LENGTH = 16;
private static BufferedWriter flushableEncryptedBufferedWriter(File file, boolean append) throws Exception
{
FlushableCipherOutputStream fcos = new FlushableCipherOutputStream(file, key, append, false);
return new BufferedWriter(new OutputStreamWriter(fcos, "UTF-8"));
}
private static InputStream readerEncryptedByteStream(File file) throws Exception
{
FileInputStream fin = new FileInputStream(file);
byte[] iv = new byte[16];
byte[] headerBytes = new byte[HEADER_LENGTH];
if (fin.read(headerBytes) < HEADER_LENGTH)
throw new IllegalArgumentException("Invalid file length (failed to read file header)");
if (headerBytes[0] != 100)
throw new IllegalArgumentException("The file header does not conform to our encrypted format.");
if (fin.read(iv) < 16) {
throw new IllegalArgumentException("Invalid file length (needs a full block for iv)");
}
Cipher cipher = Cipher.getInstance("AES/CBC/PKCS5Padding");
cipher.init(Cipher.DECRYPT_MODE, key, new IvParameterSpec(iv));
return new CipherInputStream(fin,cipher);
}
private static BufferedReader readerEncrypted(File file) throws Exception
{
InputStream cis = readerEncryptedByteStream(file);
return new BufferedReader(new InputStreamReader(cis));
}
@Test
public void test() throws Exception {
File zfilename = new File("c:\\WebEdvalData\\log.x");
BufferedWriter cos = flushableEncryptedBufferedWriter(zfilename, false);
cos.append("Sunny ");
cos.append("and green. \n");
cos.close();
int spaces=0;
for (int i = 0; i<10; i++) {
cos = flushableEncryptedBufferedWriter(zfilename, true);
for (int j=0; j < 2; j++) {
cos.append("Karelia and Tapiola" + i);
for (int k=0; k < spaces; k++)
cos.append(" ");
spaces++;
cos.append("and other nice things. \n");
cos.flush();
tail(zfilename);
}
cos.close();
}
BufferedReader cis = readerEncrypted(zfilename);
String msg;
while ((msg=cis.readLine()) != null) {
System.out.println(msg);
}
cis.close();
}
private void tail(File filename) throws Exception
{
BufferedReader infile = readerEncrypted(filename);
String last = null, secondLast = null;
do {
String msg = infile.readLine();
if (msg == null)
break;
if (! msg.startsWith("}")) {
secondLast = last;
last = msg;
}
} while (true);
if (secondLast != null)
System.out.println(secondLast);
System.out.println(last);
System.out.println();
}
}